Monitoring

The F-5A is a light-weight field production monitor with Full HD resolution and nice viewing angle. Equipped with a new image processing engine, F-5A reproduces even better sharpness and peaking boost capability for focus pullers. Features such as Waveform/Vectorscope, Focus Assist, 3D LUT import, Camera Logs and HDR emulation.

The F-7H is a production monitor with ultra-high luminance of 3,600nit. The F-7H provides SDI <-> HDMI cross conversion with 1 SDI input, 1 SDI output, 1HDMI input and 1 HDMI output interfaces. It also supports all the professional features such as Waveform & Vectorscope, Audio Level Meters, Focus Assist, Range Error, Time Code Display, various Aspect Ratio and Makers, 3D LUT import, Camera Logs and HDR emulation including HDR EOTFs of PQ, HLG and SLog3.

The BM211 is a lightweight and power-efficient 21.5” broadcast monitor with an extended feature set geared towards production, editorial, and broadcast environments. This Multi-Format broadcast monitor comes with 3G/Dual-Link/HD/SD-SDI, Component, Composite, & DVI-I Inputs. Like all BM series monitors this unit features full 12-bit video processing and a native 1920x1080 resolution 8-bit panel capable of reproducing over 16.7 million colors on screen. The BM211 offers support for virtually any signal format from NTSC/PAL to HD and 2K, including advanced 12-bit, 4:4:4, and XYZ signal formats.

Video Assist uses commonly available SD card media, so you can record to memory cards that are easy to obtain. The Video Assist 7" models include 2 SD card slots so you can swap out any full cards even during recording, allowing infinite length recording. Standard SD cards or the faster UHS-II cards are perfect for broadcast because they are small, and high speed.

Receive signals from your Storm transmitter with this Vaxis Storm 1000 XR RX Receiver. This NP-mount receiver allows you to add an extra receiver to your existing Storm transmitter.
Enjoy the system’s professional transmission mode, which is close to 0 ms latency. Compatible with the Storm 1000 & 3000 TX. No antenna design to protect the most damaged parts.

Serv Pro is a hardware streaming device that allows up to 10 iPhones and iPads to monitor a video feed in HD over WiFi. Perfect for script supervisors, hair & makeup, classrooms, and documentary shoots, Serv Pro offers a compelling monitoring alternative to zero delay wireless video systems.

TVLogic F-7HS has a new 1,500nits LCD panel with Enhanced Sharpness , various built-in camera LUTs & ARRI Metadata. It may be used for DoP or Focus Puller and has following features HDMI ↔ SDI Cross Conversion, HDR Emulation (PQ, HLG, S-Log3), Custom 3D LUT Import by USB Flash Drive, ARRI Metadata, Peaking Boost, Waveform / Vectorscope

The SRM-095W displays full HD resolution of 1920x1080. It also corresponds with a wide range of image sources (3G HD/SD-SDI, HDMI) and provides a wide viewing angle (176 degrees). For maximized efficiency and economic feasibility, SRM-095W is constructed from aluminum for an extra-light body weight and a holds a built-in V-Mount. Upgraded with new FHD panel with accurate color reproduction capability, the SRM-095W gives super clear picture quality with powerful features.

The BM241 is a lightweight and power-efficient 24” broadcast monitor with an extended feature set geared towards production, editorial, and broadcast environments. This Multi-Format broadcast monitor comes with 3G/Dual-Link/HD/SD-SDI, Component, Composite, & DVI-I Inputs. Like all BM series monitors this unit features full 12-bit video processing and a native 1920x1080 resolution 8-bit panel capable of reproducing over 16.7 million colors on screen. The BM241 offers support for virtually any signal format from NTSC/PAL to HD and 2K, including advanced 12-bit, 4:4:4, and XYZ signal formats.

The Vaxis STORM 1000s Wireless HDMI/SDI Transmission kit Utilize today’s most advanced wireless video transmission technology, which can realize the broadcast-class and uncompressed 3G SDI/HDMI HD video signal transmitted with no compression and zero delay. It provides maximum 20 workable frequency channels, and supports a maximum of 20 sets working simultaneously.

The VAXIS STORM 3000 Wireless HDMI/SDI Transmission Suite utilize today's most advanced wireless video transmission technology, which can realize the broadcast-class and uncompressed 3G SDI/HDMI HD video signal transmitted with no compression and zero delay. It provides max. 10 workable frequency channels, and supports maximum 10 sets working simultaneously.